Question 1

How accurate are internet speed tests?

Accepted Answer

Speed tests are a good approximation but not perfect. Results can vary based on your device, Wi-Fi vs. wired connection, time of day, network congestion, and the test server location. For the most accurate results, connect directly to your router via Ethernet cable, close other applications, and run multiple tests at different times of day. Wired connections typically show higher speeds than Wi-Fi.

Question 2

Why is my internet slower than what I'm paying for?

Accepted Answer

Several factors can cause slower-than-expected speeds: Wi-Fi interference or distance from router, network congestion during peak hours (typically 7-11 PM), outdated router or modem, too many devices connected, ISP throttling, or your plan's advertised speed being 'up to' rather than guaranteed. Try testing with a wired connection first to rule out Wi-Fi issues. If speeds are consistently low even wired, contact your ISP.

Question 3

What is latency (ping) and why does it matter?

Accepted Answer

Latency (or ping) measures how quickly your device gets a response from a server, measured in milliseconds (ms). Lower is better. Low latency is crucial for video calls, online gaming, and real-time applications. Fiber typically has 5-15ms latency, cable 15-30ms, 5G home 25-50ms, fixed wireless 20-40ms, and traditional satellite 500-700ms. Starlink's low-earth orbit satellite achieves 20-40ms. For gaming, aim for under 50ms.

Question 4

What is jitter and why does it matter?

Accepted Answer

Jitter measures the fluctuations in the speed at which data is sent and received, measured in milliseconds (ms). High jitter causes choppy or glitchy video calls, buffering during streams, and lag spikes in online games. Ideally, jitter should be under 30ms. Jitter is often caused by network congestion, poor Wi-Fi signal, or outdated networking equipment. If you have high jitter, try using a wired connection or upgrading your router.

Question 5

Why do my speed test results vary each time?

Accepted Answer

Speed test results naturally fluctuate due to several factors: network congestion (more users online = slower speeds), server load on the speed test server, Wi-Fi interference from neighboring networks or household devices, background downloads or updates on your devices, and your ISP's network conditions. For a reliable baseline, run 3-5 tests at different times and average the results.

Question 6

How can I get the most accurate speed test results?

Accepted Answer

For the most accurate results: 1) Use an Ethernet cable to connect directly to your router, 2) Close all other browser tabs and applications, 3) Pause any downloads, updates, or streaming, 4) Disconnect other devices from your network if possible, 5) Restart your router before testing, 6) Run tests at different times of day. Wi-Fi tests will almost always show slower speeds than wired tests due to signal interference and protocol overhead.

Question 7

What should I do if my speed test shows slow results?

Accepted Answer

First, test with an Ethernet cable to rule out Wi-Fi issues. If wired speeds are still slow: restart your modem and router, check for firmware updates, ensure no other devices are using bandwidth, and run tests at different times. If speeds are consistently below 80% of your plan, document your results and contact your ISP. You may need a technician visit, equipment replacement, or a plan adjustment. Consider switching providers if the issue persists.

Question 8

How often should I run a speed test?

Accepted Answer

Run speed tests when you first set up service to verify you're getting advertised speeds, when you experience slowdowns, and periodically (monthly) to track performance. Test at different times of day to identify peak congestion patterns. Keep a log of results to have evidence if you need to contact your ISP about consistently poor performance.

Question 9

What is a good internet speed test result?

Accepted Answer

A good result means you're getting at least 80% of your plan's advertised speed on a wired connection. For example, if you pay for 500 Mbps, consistently getting 400+ Mbps is normal. Upload speeds on cable plans are much lower than download - getting 80% of the advertised upload is good. Latency under 30ms is excellent for most uses, under 50ms is good, and over 100ms may cause issues with video calls and gaming.

Internet Speed Test

Powered by Cloudflare Speed Test

Understanding Your Results

Not happy with your speed?

Why Internet Speed Matters

Streaming

Remote Work

Gaming

Frequently Asked Questions